IMPORTANT NOTES
1
www.camltomlin.com
FLOW INSTALLATION - CORNER
PRODUCT INFO:
SERIAL#:
DATE OF PURCHASE:
WHERE PURCHASED:
Thank you for buying a CAML-TOMLIN FLOW shower door!
Before you begin, please take a few minutes to read the following notes and record your product information.
Keep these instructions in a safe place for future reference.
We recommend that you read through entire manual BEFORE beginning the installation.
Please ensure that your shower base is properly installed against the 2x4 stud frame and that it is perfectly
leveled.
Use wood reinforcement where the threshold of your base meets the tile; this is where your shower doors
will mount to the wall.
If you are building a custom base, please contact CAML-TOMLIN (1.866.884.5290) for details and base
specifications in order to ensure that the doors and base will work together.
Please note that this is a 2 person installation, and that safety glasses and safety shoes must be used during
the installation.
Safety gloves are also recommended to ease the handling of glass panels.
Inspect your unit upon opening. If any hardware or glass panels are damaged in any way, contact CAML
TOMLIN immediately.
Do not install damaged units
.
Ensure that the bottom edges of your glass panels are always protected during installation (you can use the
cardboard box supplied with your unit). Also, please note that all glass panels are tempered. Exercise caution
at all times in order to prevent chipping or cracking your glass.
NEVER install glass panels that are either chipped, cracked, or damaged in any other way.
Please check your glass panels carefully before installation. If your glass panels are damaged, please contact
CAML-TOMLIN (1.866.884.5290). Tempered glass becomes hazardous once it is damaged.
A wall jamb extension and wall mount expansion are included with your FLOW shower door. Please note that
these parts can be used if your opening is larger than average.
NOTE:
