DDNS Registration
Network Setup -
3
If you have DYNAMIC IP service from your
Internet Service Provider (ISP), you can’t tell
what current IP address of IP Camera is.
To solve this problem, you have to register to
our DDNS service.
At first, we recommend, you have to check if
you are using dynamic addressing. If so, please,
register your IP Video Server on our DDNS
website before you configure, setup, or install
the IP Camera.
Even though your IP is not dynamic, you will
get a benefit if you register to DDNS. In this
case, you just remember ‘alex.net4c.net/gate1’
instead of complicated series of number like
http://201.23.4.76:8078.
For more detail information, please contact
our Support Center.
To register IP Camera to DDNS, you should know the ‘Serial No.’ of
your IP Camera. The ‘Serial No.’ can be found in section 6 ‘Setup -
DDNS’ menu.
To use a public DDNS called ‘dyndns’ or ‘no-ip’, you can find detail
information on how to use this service.
(Please, visit its web site : http://www.dyndns.com or
http://www.no-ip.com)
