background image

CAMON Chipper Shredder

C150/0415

 

Page 3

Safety

ALWAYS start the engine in the open air

DO NOT smoke when refuelling

DO NOT mix OIL with the fuel

ALWAYS stop the engine before making any adjustments, refuelling, moving or 

cleaning, or when the unit is unattended

USE ONLY fuel from containers designed for this purpose - refuel outdoors only and 

replace the tank cap securely

IN CASE of petrol spillage move the machine away from the area of spillage and 

allow the petrol vapours to dissipate before starting the engine

DO NOT remove any safety guards that are fitted

DO NOT touch any moving parts or attempt any maintenance whilst the machine is 

running - KEEP HANDS  AND  FEET  AWAY

DO NOT allow children or anyone uninstructed to operate the machine - KEEP  

ANIMALS  AWAY

ALWAYS wear suitable clothing to give personal protection including footwear that 

offers a good grip

ALWAYS wear safety glasses and ear protection

AVOID wearing loose garments that may catch in moving parts

KEEP hands, feet and clothing out of openings, discharge and moving parts when 

the machine is operating or the engine is running 

KNOW how to stop the machine in an emergency

NEVER interfere with any control settings on the engine

NEVER select reverse gear with your back to a wall or other immovable object

IF A FAULT develops DO NOT attempt any repair - immediately contact the supplier 

from whom the machine was obtained

VISUALLY INSPECT the machine before use - ensure all nuts and bolts are tight and 

not worn or damaged

KEEP IN MIND the operator is responsible for accidents or hazards occurring to 

people or property

Summary of Contents for C150

















Reviews: