CAMON Rotavators
Page 8
PSR/AM/0912
Operation
Use handlebar adjuster (G) to set handlebar height.
Hold the handlebar and pull up the clutch lever (C).
Depress the red stop lever (A) and select working speed 1 (D). NEVER select a higher wheel speed
for work.
Ensure forward/reverse lever is in forward position (L).
Engage drive to the digging knives by pushing the PTO lever (E) forward.
Release clutch lever (C) slowly and fully, keeping the red machine stop lever depressed as the
machine will stop if released.
Commence work.
Close the throttle (F).
Engage clutch lever (C).
Locate gear lever (D) in neutral position.
Disengage drive to the digging knives by pulling the PTO lever (E) backwards.
Release clutch lever (C).
Release the machine stop lever (A) completely.
Move the engine stop lever (B) to position O ‘STOP’.
WARNING: THE EXHAUST COVER MAY BE HOT - DO NOT TOUCH.
To Stop Engine