Copyright Homecast Europe GmbH V1.6
17
Technische Änderungen und Irrtümer vorbehalten
a) Press the
/
button to watch the satellite in the
pre-programmed list. Press
“OK“
button to replace
the current satellite with the selected satellite.
a) Press the
/
button, the right screen shows the
transponder lists.
b) Press the (OK) button to select other transponder. If
you select one oft he alternative satellite names, the
transponder list is changed automatically according
tot he selected satellite name.
a) Select one oft he LNB Power types using
/
button.
You can select LNB Power value as 13/18V normally
or if the distance between antenna and receiver is
further than 60m, you can select LNB Power value as
14/19V.
a) Select the LNB Type value.
If you have selected User Single or User Dual, enter
LNB frequency value directly, and press (OK) button.
If you select LNB Type value as 9750/10600,
9750/10750 or User Dual, 22 kHz value is fixed to auto
mode, in other case you can select a value depending
on usage of 22kHz tone switch box.
5. Menu Operation
