Monitor displays
“NO IMAGE”
Monitor / transmitter
have Wi-Fi connectivity
but there is no camera
signal input to the
transmitter.
Check all connections for backup
camera. Confirm that connectors are
screwed together.
Monitor displays
“NO CONNECTION”
Wi-Fi connection has
been interrupted.
Wait 30 seconds to see if camera picture
returns. If camera picture does not
return, disconnect power to the monitor,
wait 10 seconds and plug power back
into monitor. If this issue occurs often it
is because of weak Wi-Fi signal strength.
The transmitter and or monitor may
need to be repositioned closer to each
other.
Camera image freezes on
monitor screen
Weak or No Wi-Fi
signal strength.
Wait 30 seconds to see if camera picture
returns. If camera picture does not
return, disconnect power to the monitor,
wait 10 seconds and plug power back
into monitor. If this issue occurs often it
is because of weak Wi-Fi signal strength.
The transmitter and or monitor may
need to be repositioned closer to each
other.
