The graduation disc also will be used to
indicate the approximate direction and
position of the desired satellite. With the
enclosed compass find out the direction
north and turn the Indicator
"N" into this direction.
Turn the indicator of rotation handle into the area of desired satellite,
which
appears highlighted in colour on the graduation disc.
Turn the rotation handle slowly inside
this area, until you receive the desired
TV-channel.
Note: Stop rotating the antenna if
you notice a resistance. Don't try to
get over it.
Note: Most receivers display the signal strength on the TV set. You can
use this option to maximize the signal strength by sweeping the dish
from side to side.
For fine tuning you may turn the rotation handle slowly to the left or right.
Also, use the elevation handle and turn it marginally clockwise or
counter clockwise to get the best signal.
