23 - 64
8
- DISMANTLING AND DISPOSING OF THE COMPONENTS
8.1 General
At the end of its working life, the tool shall be dismantled.
The tool components shall be divided in order to dispose of them according to the materials they are made of (batteries, metal,
plastic, etc.) and in compliance with the regulations in force in the country where the tool was used.
8.2 Information for the end-users
According to art. 13 of the Law Decree dated the 25
th
of July, 2005, no. 151 “Application of the 2002/95/CE, 2002/
96/CE and 2003/108/CE Directives about the limitation of use of dangerous substances in the electric and
electronic devices and about the waste disposal”.
The symbol of the crossed waste-bin shown on the devices indicates that the product, having reached the end of its lifetime,
shall be collected separately. The user shall, therefore, bring the complete device, with all its essential parts, to a selective
electronic and electro-technical waste disposal point or to a dealer, when buying a new, similar device. The adequate selective
waste collection for the following recycle and/or environment-compatible disposal helps avoiding any negative impact on
environment and health. Any end-user’s unauthorized product disposal would cause economic sanctions according to the Law
Decree no. 22/1997 (art. 50 and following ones).
AUTHORIZED SERVICE POINT
7
- MAINTENANCE
7.1 Routine maintenance
WARNING!
•
Before any routine maintenance operations, select the OFF mode in the ON-OFF switch (picture D) and discon-
nect the cable (1).
•
All maintenance operations which are not described in this manual shall only be carried out by Authorized
Service Points.
Routine maintenance operations can be carried out by the operators.
7.1.1 Battery storage and maintenance
Before storing the tool for a prolonged time, carry out the following operations:
•
Make a complete battery (2) recharging cycle.
•
Every 180 days carry out a complete battery (2) recharging cycle.
•
During the storage time, do not leave the tool in the rain. Keep it in its case in a dry place.
WARNING!
•
If a complete battery (2) recharge is not carried out every 180 days the battery (2) will deteriorate irreparably.
•
Keep the battery (2) in a dry place, away from heat sources, at a temperature between 5°C and 30°C.
7.2 Special maintenance
WARNING!
Any special maintenance operation shall be carried out by a CAMPAGNOLA S.r.l. Authorized Service Point only.
It is indicated by the CAMPAGNOLA S.r.l. dealers and is able to carry out any product reparations.
