21 - 72
2 - SAFETY PRECAUTIONS
2.4 Use
WARNING!
The machine has no brakes, therefore make sure it is in a safe and stable position at all times. At the end of the working
day always empty the air tank.
•
When using the machine, the slope inclination shall not be superior to 20%, as it may cause the engine and compressor
break.
•
Do not touch the head (B),the hydraulic hose (5) of the compressor, the muffler (3), as these parts reach a very high
temperature during operation and keep hot for a long time after stopping the machine.
•
Do not leave flammable material or nylon on or near the compressor (B) and near the engine muffler (3).
NOTE
At the end of every working day, always empty the air tank (chapter 5.1.2).
2.5 Maintenance
WARNING!
Before performing any maintenance operations or adjustments on the mechanical parts of the machine, put on a hel-
met, heavy-duty work shoes, gloves and goggles. Then empty the air tank by using the valve (18) and stop the engine
(chapter 4.3).
•
Routine maintenance and repairs can be carried out only by an operator with the necessary physical and intellectual
qualifications.
•
Special maintenance and repairs can be carried out only by a service mechanic.
•
Keep bystanders away when servicing or repairing the machine.
•
Only service mechanics are authorised to inactivate the safety devices provided on the machine when maintenance is to
be performed. It is their responsibility to safeguard the operators and the machine. The safety devices should be activated
as soon as maintenance work has been completed.
•
All maintenance procedures not dealt with in this manual are to be performed at authorised service points.
•
When maintenance or repairs have been completed, the machine can be started again only if duly authorised by the
service mechanic. The service mechanic must make sure:
- work has been completed
- the machine runs in a trouble-free manner
- the safety devices are activated
- no one is working on the machine.
