24 - 72
3 - SPECIFICATIONS
3.7 Motorcompressor parts
Pos
Description
Function
(A)
Engine
Operates the compressor
2
(B)
Compressor head block
Fills the tank with compressed air
3
1
Name plate
CE name plate with compressor identification details
1
2
Engine air filter
Filters the inflowing air to cool the engine
2
3
Muffler
Engine exhaust pipe
2
4
Compressor air filter
Filters the inflowing air to cool the compressor
3
5
Copper pipe
Air hose connecting the compressor head block with the air tank
3
6
Tank
Contains the fuel required to operate the engine
4
7
Starter
Is operated before the machine is started up
4
8
Oil filler
Used to add or change oil in the compressor
5
9
Engine recoil rope starter
To be pulled to start the engine
4
10
Throttle lever
Allows the manual regulation of the engine r.p.m.. If the throttle
lever is pressed to the lowest point, the engine switches off
4
11
Drain plug
Allows to drain the oil from the engine
5
12
Oil filler cap
Used to refill oil in the engine and/or to check the oil level
5
13
Drain plug
Used to drain the oil from the compressor
5
14
Compressor tank
Contains the necessary compressed air for the use
6
15
Tank pressure gauge
Indicates the pressure in the air tank
7
16
Oil dripping regulator
Regulates the oil flowing to the lubricator
7
17
Unloader valve
Keeps the pressure in the air tank at the correct value
6
18
Drain tap
Used to exhaust the air from the tank
6
19
Safety valve
Comes into action when the unloader valve is faulty
7
20
Lubricator
Used to spray oil into the outflowing air to lubricate all the pneumatic
tools
7
21
Quick coupling
Connects the pneumatic tool with the air hose
7
With reference
to picture nr.
