5
- BRAKES
•
Fit the rotor into its seat, taking care with the direction of rotation indicated by the arrow (Fig. 8).
•
Fit the washer (A - Fig. 8) and screw the provided lockring (B – Fig. 8).
•
Tighten the lockring to
40 Nm (354 in.lbs)
using the tool UT-BB130 (C - Fig. 8 - not provided) and
torque wrench (D - Fig. 8).
5.1 - ASSEMBLING THE ROTOR ON AXIAL FIXING SYSTEM
™
SYSTEMS
ENG
8
This wheel is also compatible with the SRAM XD body (version with 30 mm pawl zone diameter).See the instruction sheet provided by the sprocket pack manu-
facturer for installation, removal and maintenance instructions.
4.4 - 11S, 12S SRAM CORPORATION SPROCKETS (on RL Campagnolo body FOR Sram Corporation RL XD BODY)
A B C
D
35 N.m
A B C D
40 Nm
(354 in.lbs)
8
