ERGOPOWER CONTROL LEVERS - Rev. 00/ 07-2022
CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL
5
3 - INTERFACE WITH HANDLEBAR
3.1 - INTERFACE WITH HANDLEBAR FOR ERGOPOWER MECHANICAL / EPS
CONTROLS
R = 60 - 75 mm
NO!
OK!
• Do not lodge the upper part of the command in the rectilinear section of the handlebar (Fig. 1 / Fig. 2).
• Lodge the command in the curved section measuring R = 60 - 75 mm with a diameter = 23.8 - 24.2 mm (including any ovalization) to gua-
rantee more effective fastening (Fig. 1/Fig. 2).
R 65 - 75
R 65 - 75
NO!
R = 60 - 75 mm
R = 60 - 75 mm
NO!
OK!
Make sure that the curved section of the handlebar where the command is to be fixed, has a sufficiently rough surface to ensure
a better grip.
CAUTION
a
Combinations other than those provided for in the above table could cause the drivetrain to malfunction and potentially be the cause
of accidents, physical injury or even death.
WARNING!
1
2
