CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL
12
4.1 - CHAIN REPLACEMENT
Fig.1
A chain typically lasts, depending on the
conditions of use and on the frequency
and quality of maintenance operations.
Use a high precision caliper gauge to
measure, in different points of the chain,
the length as indicated in fig. 1. If even
one of the measurement is longer than
132.60 mm the chain must immediately
be replaced.
1
2
3
132,60 mm max
4
5
6
132,60 mm max
!
If even one of the measurement is longer than 132.60 mm the chain must immediately be replaced.
5 - PERIODIC MAINTENANCE TABLE
Maintenance intervals are strictly approximate and may vary significantly in relation to the intensity and conditions of use (for example:
competitions, rain, winter roads with salt, weight of the athlete, etc.). Schedule the appropriate maintenance with your mechanic.
CHAIN - Rev. 06/ 02-2021
PROCEDURE
MILEAGE IN KM
(MAX)
TIME
(MAX)
METHOD FOR
CHECKING
Check lengthening
PROCEDURE
MILEAGE IN KM
(MAX)
TIME
(MAX)
METHOD FOR
CHECKING
Check lengthening
Failure to timely replace the chain can result in unexpect chain failure while riding, resulting in an accident, perso-
nal injury or death.
WARNING!
