FT-289 La Mirande Fountain
Assembly Instructions
FT-289B (25 lbs)
17"W x 6.25"H
Step 12 - Position the small bowl (FT-289B) over the small pedestal (FT-273C).
Step 13 - Secure the loose end of the non-kink tubing of assembly #3 to the pipe protruding from
the bottom of the small bowl (FT-289B) with a hose clamp.
Step 14 - Center the small bowl (FT-289B) over the small pedestal (FT-273C).
FT-273C (30 lbs)
13.75"W x 9"H
Step 10 - Position the small pedestal (FT-273C) over the center of the large bowl (FT-289E).
Step 11 - Feed the tubing through the hole and to the top of the small pedestal (FT-273C).
FT-289A (15 lbs)
12.75"W x 7"H
Step 15 - Fit the finial (FT-289A) into the small bowl (FT-289B) by feeding the protruding copper
pipe from the bowl into the hole in the bottom of the finial.
FT-273D (5 lbs)
6"L x 2"W x 4.75"H
Step 16 - Place the small pedestal door (FT-273D) into the small pedestal (FT-273C).
FT-289G (5 lbs)
7"L x 2"W x 6"H
Step 17 - Place the pump house door (FT-289G) into the pump house (FT-289F).
Step 18 - Fill the fountain with water.
