86
C
AL.
6
77
＊
Setting the Time and Day of the Basic Clock
Once the time has been set for the basic clock,
always make sure to set the time of the minutes
repeater according to the time of the basic
clock.
If the time is different between the basic clock
and minutes repeater, the chime will not sound
at the correct time shown on the basic clock
(current time).
1)
Pull out the crown to the 2nd position so that the second
hand stops at 0 seconds.
2)
Turn the crown in the clockwise direction (so that the
hour and minute hands rotate clockwise) to set the day.
• The day can be corrected rapidly by moving the hands back and forth between 9:00 PM and
1:00 AM.
3)
Turn the crown either to the right or left to set the hours, minutes and 24 hour hand to the
current time.
• Set the time while paying attention to AM and PM by looking at the 24 hour hand.
4)
Always make sure to return the crown to the normal position.
(A)
(B)
Hour hand
Minute
hand
24 hour
hand
Day hand
Second
hand
(C)
Summary of Contents for 776
Page 1: ...CAN12 CAN12 2 W205 H70 W100 H70 CAN12 INSTRUCTION MANUAL...
Page 9: ......
Page 16: ...83 Grand Complication A B C...
Page 69: ......
