15 Sp
DG480000CK
General Safety
(Cont’d.)
Check sanding
pad for cracks and
wear prior to use. Replace if damaged.
A damaged pad can break apart during
use and cause serious injury.
11. Ensure sandpaper is fully sealed
onto sanding pad and that pad is
securely tightened to tool spindle.
12. Do not free spin tool. Acuate
trigger just before engaging work
surface and release trigger when
lifting tool away from surface.
WORK AREA
Do not
operate
a power tool in an
explosive atmosphere, such
as in the presence of
flammable liquids, gases, or dust.
Power tools create sparks which may
ignite the fumes or dust.
Keep work area
clean and well
lighted. Cluttered benches and dark
areas invite accidents.
Keep bystanders,
children, and
visitors away while operating a power
tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
Double insulated tools are equiped with
a polarized plug (one plug blade is wider
that the other). this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully into the outlet, turn the
plug over and insert into plug again.
Do not expose
power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
Avoid body contact
with grounded
surfaces such as pipes, radiators,
ranges, and refrigerators. There is an
increased risk of electric shock if your
body is grounded.
Do not abuse cord.
•
Never carry tool by its cord.
•
Never pull the cord to disconnect
from receptacle.
1. Make sure cord is located so that it
will not be stepped on, tripped
over, or otherwise subjected to
damage or stress.
2. Do not use an extension cord unless
absolutely necessary. Use of
!
WARNING
!
WARNING
!
WARNING
!
CAUTION
!
CAUTION
!
WARNING
!
WARNING
2
Operating Instructions and Parts Manual
5. Keep hands away from rotating
parts.
6. Use clamps or another practical
way to secure the workpiece to a
stable platform. Never hold work in
your hand, lap, or against other
parts of your body when cutting.
TOOL USE AND CARE
Do not use tool if
switch does not
turn it on or off. Any tool that cannot
be controlled with the switch is
dangerous and must be repaired.
1. This tool must NOT be modified or
used for any application other than
that for which it was designed.
Do not force the
tool. Use the
correct tool for your application. The
correct tool will do the job better and
safer at the rate for which it is
designed.
2. Maintain tools with care.
3. Check for misalignment or binding
of moving parts, breakage of parts,
and any other condition that may
affect the tool’s operation. If
damaged, have the tool serviced
before using. Many accidents are
caused by poorly maintained tools.
4. Use only accessories that are
recommended by the manufacturer
for your model. Accessories suitable
for one tool may create a risk of
injury when used on another tool.
5. Some wood contains
preservatives which can
be toxic. Take extra care
to prevent inhalation
and skin contact when
working with these materials.
Request and follow all safety
information available from your
material supplier.
6. Store tools out of reach of children
and other untrained persons. Tools
are dangerous in the hands of
untrained users.
!
CAUTION
!
WARNING
improper extension cord could
result in a risk of fire and electric
shock. If an extension cord must be
used, make sure:
• That the pins on plug of extension
cord are the same number, size and
shape as those of plug.
• That the extension cord is
properly wired and in good
electrical condition.
• If an extension cord is to be used
outdoors it must be marked with
the suffix “W-A” or “W” following
the cord type designation to
indicate it is acceptable for outdoor
use. For example – SJTW-A
3. Do not expose to rain, snow or
frost.
PERSONAL SAFETY
Do not misuse this
product. Excessive
exposure to vibration, work in
awkward positions, and repetitive
work motions can cause injury to
hands and arms. Stop using any tool if
discomfort, numbness, tingling, or pain
occur, and consult a physician.
1. Stay alert, watch what you are
doing, and use common sense when
operating a power tool. Do not use
tool while tired or under the
influence of drugs, alcohol, or
medication. A moment of
inattention while operating power
tools may result in serious personal
injury.
Avoid accidental
starting. Be sure
switch is in the locked or off position
before making any adjustments,
changing accessories, or storing the
tool. Carrying tools with your finger on
the switch with the switch on invites
accidents.
2. Remove adjusting keys or wrenches
before turning on the tool. A key or
wrench attached to a rotating part
of the tool may result in personal
injury.
3. Do not overreach. Keep
proper footing and
balance at all times.
Proper footing and
balance enable better
control of the tool in unexpected
situations.
4. Always work in a well-
ventilated area. Wear
an OSHA-approved dust
mask and safety glasses.
!
CAUTION
!
WARNING
www.chpower.com
Garantía Limitada
1
DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación:
Un año
2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100
Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400
3. QUIEN RECIBE ESTA GARANTIA (EL COMPRADOR): El comprador original (que no sea un revendedor) del
producto Campbell Hausfeld.
4. PRODUCTOS CUBIERTOS POR ESTA GARANTIA: Cualquier herramienta a motor de Campbell Hausfeld
proporcionada o fabricada por el garante.
5. COBERTURA DE LA GARANTIA: Los defectos substanciales de material y fabricación que ocurran dentro del
período de validez de la garantía.
6. LO QUE NO ESTA CUBIERTO POR ESTA GARANTIA:
A. Las garantías implícitas, incluyendo aquellas de comercialidad E IDONEIDAD PARA FINES
PARTICULARES, ESTAN LIMITADOS A LO ESPECIFICADO EN EL PARRAFO DE DURACION. Si este producto
es empleado para uso comercial, industrial o para alquiler, no se aplicará ninguna garantía. En algunos
estados no se permiten limitaciones a la duración de las garantías implícitas, por lo tanto, en tales casos
esta limitación no es aplicable.
B. CUALQUIER PERDIDA DAÑO INCIDENTAL, INDIRECTO O CONSECUENTE QUE PUEDA RESULTAR DE UN
DEFECTO, FALLA O MALFUNCIONAMIENTO DEL PRODUCTO CAMPBELL HAUSFELD. En algunos estados
no se permite la exclusión o limitación de daños incidentales o consecuentes, por lo tanto, en tales
casos esta limitación o exclusión no es aplicable
C. Cualquier falla que resulte de un accidente, abuso, negligencia o incumplimiento de las instrucciones de
funcionamiento y uso indicadas en el (los) manual(es) que se adjunta(n) al producto. Dichos accidentes,
abusos por parte del comprador, o falta de operar el producto siguiendo las instrucciones del manual
de instrucciones suministrado también debe incluir la desconexión o modificación de los instrumentos
de seguridad. Si dichos instrumentos de seguridad son desconectados, la garantía quedaría cancelada.
D. Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto.
7.
RESPONSABILIDADES DEL GARANTE BAJO ESTA GARANTIA: Reparar o reemplazar, como lo decida el
Garante, los productos o componentes que estén defectuosos, se hayan dañado o hayan dejado de
funcionar adecuadamente, durante el período de validez de la garantía
8.
RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA:
A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto.
B. Entregar o enviar el producto o componente Campbell Hausfeld al Centro de Servicio autorizado
Campbell Hausfeld más cercano. Los gastos de flete, de haberlos, deben ser pagados por el comprador.
C. Seguir las instrucciones sobre operación y mantenimiento del producto, tal como se indica(n) en el (los)
manual(es) del propietario
Esta garantía limitada es válida sólo en los EE.UU., Canadá y México y otorga derechos legales específicos.
Usted también puede tener otros derechos que varían de un Estado a otro. o de un país a otro.
