Campbell Hausfeld HV2000 Series, Operating Instructions And Parts Manual

3

www.campbellhausfeld.com

Maintenance

Be sure the air filter is clean. A dirty air filter restricts air flow 
and can cause the motor to overheat. 

iMpoRtant: 

Keep the unit at the maximum distance from the 

spray area to extend filter life.

Model HV2000

1. Remove the filter grille thumbscrew with a screw driver to 

access the filter (See Figure 3).

2. Clean the filter with mild soapy water and pat dry.
3. Replace filter if built-up with paint.

Model HV2500 and HV3000

1. Squeeze and pull to remove both filters (See Figure 4).
2. Clean the filter with mild soapy water and pat dry or replace 

filter if built-up with paint.

3. Squeeze and tuck to install filter.

HV2000 and HV3000 series

1

3

2

3

4

1

2

Model HV2000

Models HV2500 oR HV3000

Filter 

Housing 

Thumbscrew

figure 3

figure 4

Replacement parts list

Ref 
no.

part number for Model number

description

HV2000

HV2500

HV3000

Qty 

1

Filter

MP302100AJ

—

—

1

Filter pack

—

HV012600AJ

HV012600AJ

2

2

Hose 15 ft.

MP310600AJ

—

—

1

Hose 25 ft.

—

HV012500AJ

HV012500AJ

1

3

Quick connect coupler

HV002200AV

HV002200AV

HV002200AV

1

4

Stub hose

—

HA222503AV

HA222503AV

1

accessories

Ref 
no.

description

part number

Qty 

1

5 ft. Whip Hose (Use with any model)

HV012400AJ

1

2

Multi-Purpose Case

HV7008

1

3

Gun for models HV2002, HV2500, HV3000

MP331100AJ

1

4

Gun for models HV3500, HV2550 

HV7000

1

troubleshooting chart

symptom

possible cause(s)

corrective action

Poor air flow

1.Hose restricted or kinked

1.Keep air hose straight

2. Restricted filter

2.Clean or replace filter

Unusual grinding noise

Damaged turbine motor

Contact Service Center

for information about this product

call 1-800-626-4401