background image

REMINDER: Keep your dated proof of purchase for warranty purposes! 

Attach it to this manual or file it for safekeeping.

Description

Oilless compressors are designed for a
variety of home tasks. These compressors
can power smaller pneumatic tools, but
work ideally for brad nailers, finishing
nailers and staplers. 

These units

operate without oil.

Safety Guidelines

This manual contains information that
is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols. 

Danger indicates an

imminently

hazardous situation which, if not avoided,
will result in death or serious injury.

Warning indicates
a potentially

hazardous situation which, if not avoided,
COULD result in death or serious injury.

Caution indicates a
potentially

hazardous situation which, if not avoided,
MAY result in minor or moderate injury.

Notice indicates   
important

information, that if not followed, may
cause damage to equipment.

Unpacking

After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before putting
unit into service. In case of questions,
damaged or missing parts, please call the
nearest Maxus Authorized Service Center. 
Have the serial number, model number
and parts list (with missing parts circled
before calling).

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

Operating Instructions  

WX8019

DO NOT RETURN THE
PRODUCT TO THE
RETAILER!

Do not operate
unit if damaged

during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.

IN626100AV 4/09

Breathable Air Warning

This compressor/pump is NOT
equipped and should NOT be used
“as is” to supply breathing
quality air. For any application of
air for human consumption, you
must fit the air compressor/pump
with suitable in-line safety and
alarm equipment. This additional
equipment is necessary to
properly filter and purify the air
to meet minimal specifications
for Grade D breathing as
described in Compressed Gas
Association Commodity
Specification G 7.1 - 1966, OSHA
29 CFR 1910. 134, and/or Canadian
Standards Associations (CSA).

DISCLAIMER OF WARRANTIES
IN THE EVENT THE COMPRESSOR IS
USED FOR THE PURPOSE OF
BREATHING AIR APPLICATION AND
PROPER IN-LINE SAFETY AND ALARM
EQUIPMENT IS NOT SIMULTANEOUSLY
USED, EXISTING WARRANTIES ARE
VOID, AND THE MANUFACTURER
DISCLAIMS ANY LIABILITY
WHATSOEVER FOR ANY LOSS,
PERSONAL INJURY OR DAMAGE.

STOP!

Oilless Compressors

See Warranty on page 6 for important information about commercial use of this product.

© 2009

Record the Model and Serial numbers
(located on the compressor) and the
date of purchase in the spaces below.

Model No. ________________________

Serial No.

________________________

Date of purchase __________________

Retain these numbers for future
reference

.

CALIFORNIA PROPOSITION 65

You can

create dust when you cut,
sand, drill or grind materials
such as wood, paint, metal,
concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.

This product or its
power cord

contains lead, a chemical known to the
State of California to cause cancer and
birth defects or other reproductive
harm. Wash hands after handling.

General Safety
Information

OPERATIONAL SAFETY

Since the air compressor and other
components (material pump, spray
guns, filters, lubricators, hoses, etc.)
used, make up a high pressure pumping
system, the following safety precautions
must be observed at all times:

1. Read all manuals included

with this product carefully.
Be thoroughly familiar
with the controls and the
proper use of the equipment.

MANUAL

Summary of Contents for IN626100AV

























Reviews: