Campbell Hausfeld IronForce IFN328K0 Operating Instructions Manual Download

Page: 1 / 32

Narrow Crown
Stapler

Table of Contents

Descripion . . . . . . . . . . . . . . . . . . . . . . .1

Unpacking . . . . . . . . . . . . . . . . . . . . . . .1

Safety Guidelines . . . . . . . . . . . . . . . . .1

Important Safety Information . . . . . . .1

Tool Components and
Specifications. . . . . . . . . . . . . . . . . . . . .2

Operating Instructions . . . . . . . . . . . . .4

Lubrication . . . . . . . . . . . . . . . . . . . . .4

Recommended Hookup. . . . . . . . . . .5

Operational Mode . . . . . . . . . . . . . . .5
Single Sequential Mode . . . . . . . . . .5
Operating A Sequential Trip Tool . . .5
Loading/Unloading The Tool. . . . . . .5
Adjusting the Fastener Penetration 6
Adjusting Direction of Exhaust . . . . .6

Clearing A Jam From The Tool . . . . .6

Maintenance . . . . . . . . . . . . . . . . . . . . .6

Fasteners . . . . . . . . . . . . . . . . . . . . . . . .7

Interchange Information . . . . . . . . . . .7

Troubleshooting Chart . . . . . . . . . . . . .8

Warranty . . . . . . . . . . . . . . . . . . . . . . .10

Description

This stapler is designed for cabinetry,
casebacks, decorative trim and crafts.
Features include: adjustable exhaust,
single sequential trigger, quick clear
nose, and an adjustable depth of drive
mechanism.

Unpacking

After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.

Model IFN328K0

CALIFORNIA PROPOSITION 65

This product or

its power cord may

contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.

You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.

Safety Guidelines

This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.

Danger indicates an

imminently

hazardous situation which, if not
avoided, WILL result in death or serious
injury.

Warning indicates a

potentially

hazardous situation which, if not
avoided, COULD result in death or
serious injury.

Caution

indicates a

potentially

hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.

Notice indicates

important

information, that if not followed, may
cause damage to equipment.

NOTE:

Information that requires special

attention.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS

When using tools,

basic precautions

should always be followed, including
the following:

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

IN725100AV 3/08

See Warranty on page 10 for important information about commercial use of this product.

Operating Instructions

IFN328K0

Locate model and date code on
tool and record below:

Model No.: _____________________

Date Code: _____________________

Retain these numbers for

future reference.

For parts, product & service information

visit

www.chpower.com

Campbell Hausfeld Tools meet or exceed Industries’ Standards as set forth by the American National Standard
Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002.