Campbell Hausfeld SB101000, Operating Instructions Manual

GENERAL

a.  

To reduce the risks of 
electric shock, fire, and 
injury to persons, read all 
the instructions before 
using the tool.

b.   Be thoroughly familiar with the 

controls and the proper use of the 
equipment. Follow all instructions. 
Contact your Campbell Hausfeld 
representative if you have any 
questions.

c.    Only persons well acquainted with 

these rules of safe operation should 
be allowed to use the unit.

Read and  

 understand tool 

labels and manual. Failure to follow 
warnings, dangers, and cautions could 
result in DEATH or SERIOUS INJURY.

WORK AREA

a.  

Keep the work area clean and well 
lighted. 

Cluttered benches and dark 

areas increase the risks of electric 
shock, fire, and injury to persons. 

b.  

Do not operate the tool 
in explosive atmospheres, 
such as in the presence of 
flammable liquids, gases, 
or dust. 

The tool is able 

to create sparks resulting in the 
ignition of the dust or fumes. 

c.   

Keep bystanders, children, and 
visitors away while operating the 
tool.

 Distractions are able to result in 

the loss of control of the tool. 

PERSONAL SAFETY

a.  

Stay alert. Watch what you are 
doing and use common sense 
when operating the tool. Do not 
use the tool while tired or under 
the influence of drugs, alcohol, 
or medication. 

A moment of 

inattention while operating the 
tool increases the risk of injury to 
persons. 

b.  

Dress properly. Do not wear loose 
clothing or jewelry. Contain long 
hair. Keep hair, clothing, and 
gloves away from moving parts. 

Loose clothes, jewelry, or long 
hair increases the risk of injury to 
persons as a result of being caught 
in moving parts. 

c.   

Avoid unintentional starting. 
Be sure the switch is off before 
connecting to the air supply. 

Do not 

carry the tool with your finger on 
the switch or connect the tool to th 
air supply with the switch on. 

d.  

Do not overreach. Keep proper 
footing and balance at all times. 

Proper footing and balance enables 
better control of the tool in 
unexpected situations. 

Important Safety Instructions 
(Continued) 

e.  

Use safety equipment. 

A dust mask, 

non-skid safety shoes and a hard 
hat must be used for the applicable 
conditions. 

f.   

Always wear eye 
protection.

g.  

Always wear hearing 
protection when using 
the tool. 

Prolonged 

exposure to high intensity 
noise is able to cause 
hearing loss. 

h.  

Do not attach the hose or tool to 
your body. 

Attach the hose to the 

structure to reduce the risk of loss of 
balance if the hose shifts.

i.   

Always assume that the tool 
contains fasteners. 

Do not point 

the tool toward yourself or anyone 
whether it contains fasteners or not. 

j.

Do not drive a fastener 
on top of other 
fasteners. The fastener 
could glance and cause 
death or a serious puncture wound.

k.

Remove finger 

  from the trigger 

when not driving fasteners. Never 
carry the tool with finger on trigger, 
the tool is able to fire a fastener. 
Activate the trigger lock when not in 
use.

Always remain in a 

  fi rmly balanced 

position when using or handling the 
tool.

2

Operating Instructions

www.chpower.com

 Tool Components and Specifications

 • 

REQUIRES: 

0.2 SCFM with 10 

fasteners per minute @ 90 psi

 •  

AIR INLET: 

1/4 inch NPT 

 • 

STAPLE SIZE RANGE:

1/4 inch to 9/16 inch

 • 

MAGAZINE CAPACITY: 

150 fasteners per load

 • 

STAPLES: 

3/8 inch crown

 • 

WEIGHT:

 2 lb.

 • 

LENGTH: 

9-1/4 inches

 • 

HEIGHT: 

6 inches 

 • 

MAXIMUM PRESSURE:

 100 psi

 • 

PRESSURE RANGE:

 60 psi – 100 psi

Magazine

Adjustable Exhaust Deflector

Rubber Comfort Grip

Trigger

Swivel Plug

Magazine 

Latch

Pull-out Warning 
Decal