Solar Radiation Sensor Mounts
8
5.
The CM255LS bracket (FIGURE
) uses two set screws to secure the
crossarm or the pole in the channel at the base of the bracket. For
pyranometers mounted horizontally, ensure the mounting bracket is
horizontal in two dimensions. For pyranometers to be mounted at an angle
with the CM255 or CM255LS, set the mounting bracket angle to the
desired angle prior to tightening the mounting hardware.
FIGURE 6-4. CM255LS
6.
The CM226 uses two bolts, wing nuts, and a clamp piece to secure it to a
crossarm or mast (FIGURE
