Solar Radiation Sensor Mounts
4
Mount
Description
Compatible Sensors
1
Mounts to
CM255LS
Fully
Adjustable
Solar Sensor
Mounting
Stand with
Leveling
Screws
Includes leveling
screws that allow
leveling in a horizontal
position and then
pivoting or tilting to
the correct azimuth.
Dimensions are
15.88 x 10.8 x 15.88 cm
(6.25 x 4.25 x 6.25 in),
and weight is
0.61 kg (1.35 lb).
CS300
2
, LI200X
2
,
LI200S
2
, LI190R
2
,
LI190SB
2
, CMP3,
CMP6
3
, CMP11
3
,
CMP21
3
, LP02,
SP-LITE, PQS1,
SR20-T2-L
4
(not
compatible with
RSRs)
CM202,
CM202SS,
CM203, CM204,
CM204SS, or
CM206 crossarm,
mast, or user-
supplied pipe with
a 1.315 in. OD
CM260
Fully
Adjustable
Pyranometer
Mounting Kit
for ATI
Torque Tube
Designed specifically
for securing a
pyranometer in the
limited space near the
end cap of the ATI
Torque Tube. It has
either a standard
pyranometer plate (–S)
or a plate for the
Hukseflux VU01
ventilation unit (–V).
Dimensions are
17.78 x 18.75 x 20.17 cm
(7.00 x 7.38 x 7.94 in)
not including the U-bolt,
and weight is
1.16 kg (2.55 lb)
for –S,
or 1.13 kg (2.5 lb)
for –V.
Standard Pyranometer
Plate (–S)
CS300
2
, SP230
2
,
LI200RX
2
, LI200R
2
,
LI190R
2
, LI190SB
2
,
CMP3, CMP6
3
,
CMP11
3
, CMP21
3
,
LP02, SP-LITE,
PQS1
–V VU01 Plate
Hukseflux SR20
housed in a VU01
Ventilation Unit
ATI Torque Tube
or any
12.7 cm (5 in)
diameter tube
CM265
Fully
Adjustable
Pyranometer
Mounting Kit
for
NEXTracker
Torque Tube
Designed specifically
for securing a
pyranometer near the
end cap of the
NEXTracker Torque
Tube. It has either a
standard pyranometer
plate (–S) or a plate for
the Hukseflux VU01
ventilation unit (–V).
Dimensions are
14.91 x 20.22 x 22.23 cm
(5.87 x 7.
96 x 8.75 in)
and weight is
1.52 kg (3.35 lb)
for –S,
or 1.50 kg (3.30 lb)
for –V.
Standard Pyranometer
Plate (–S)
CS300
2
, SP230
2
,
LI200RX
2
, LI200R
2
,
LI190R
2
, LI190SB
2
,
CMP3, CMP6
3
,
CMP11
3
, CMP21
3
,
LP02, SP-LITE,
PQS1
–V VU01 Plate
Hukseflux SR20
housed in a VU01
Ventilation Unit
NEXTracker
Torque Tube or
any 12.7 cm (5 in)
diameter tube
1
Retired sensors may also be compatible. Contact Campbell Scientific for more information.
2
A leveling base is required to mount the CS300, LI200X, LI200S, LI190R, or LI190SB.
3
Assumes the CMP6, CMP11, and CMP21 are not housed in the CVF4 Heater/Ventilation Unit.
4
Assumes the SR20-T2-L is not housed in the VU01 Heater/Ventilation Unit.
CM265-V
CM265-S
CM260-S
CM260-V