Campbell Company
AGPS User’s Manual
906-0001 AGPS User Manual Rev E
Page 10 of 14
© Dick Campbell Company 2015. All rights reserved
Clearance Interval:
•
Nothing
: Default – independent operation
•
Destination Beaconing
– Destination station provides target beaconing for pedestrian
to locate.
NOTE:
AGPS must be connected to another station (same phase) and an
extended press must be made to have the destination beaconing tone play in the
clearance phase.
•
Countdown
– Audible countdown of the clearance phase. Note: Will need two cycles
to calibrate Flashing Don’t Walk time.
Walk Timeout:
Maximum time in seconds for walk message to play
Locator Period:
Time in seconds between locator repetitions
Extended Press Time:
Time to hold the button to get an extended press
Repeated Ack Period:
Sets time in seconds between repeated acknowledgement message.
Set to zero to disable
Walk Delay:
Sets time in seconds to delay the walk message
Sync Call:
Synchronize outputs of two pedestrian stations
•
None –
Acts like and independent station
•
Regular Press -
Target station acts as if a regular Press were made
•
Extended Press –
Both stations activate as if an extended press were made
•
Button Bypass –
Operation only when button must place call without power
VIB Intensity:
Adjust the vibration intensity of the Walk indication
Volume:
Two settings adjust volume for non-locator indications and locator tone
independently
•
Non-Locator Volume –
Adjusts the volume of the audible messages or percussive
tones or indications
•
Locator –
Adjusts the locator volume
Night Mode -
Independent settings by time (figure 4)
•
Start -
Begin night mode volume settings
•
End –
Terminates night mode volume settings
Volume GUI:
Volume increase (Refer to Figure 1)
•
Non Locator AGC –
Adjusts the response for audible messaging independently
(Volume over ambient adjustment made by moving Volume slope)
•
Locator AGC – Adjusts the response of the locator tone
independently (Volume over
ambient adjustment made by moving Volume slope)
•
Decrease Limit – Maximum AGC allowed to decrease (Lower right hand vertical bar)
•
Increase Limit – Maximum AGC allowed to increase (Top right hand vertical bar)
Location
: City, State
Intersection
: Cross Street for reference
Figure 4
