Raven X - Telus EV-DO Airlink Cellular Modem
9.
The next screen will let you know that the modem has registered
on the network and that it has obtained an IP address. This
process can take up to 1 minute to complete. Be sure to write
down the modem’s IP address as we will use it to program the
advanced settings of the modem
.
10. At this point the modem is now ready for advanced programming
using AceManager. These following steps need to be completed
fairly quickly as the modem is on a dynamic IP network and the
IP address can change at any time.
5
Set Up Modem using Ace Manager.
1.
The next steps program the Raven to function in IP mode.
2. Start AceManager and select the Connect tab in the upper left
corner of the menu selection bar. This connection is a wireless
connection using IP addressing.
3. Connect using the IP address you obtained from the setup wizard
and default password as shown.
10
