CC5MPX & CC5MPX-Z Digital Network Camera
60
Table 7-11 PakBus Communication Settings
Variable Allowable
Values
Description
RS-232 BAUD
Rate
•
115200
•
57600
•
38400
•
19200
•
9600
Select the desired BAUD rate. Once the BAUD rate is set it will
always be fixed. The factory Default Setting is 115200 BAUD.
RS-485 BAUD
Rate
•
115200
•
57600
•
38400
•
19200
•
9600
Select the desired BAUD rate. Once the BAUD rate is set it will
always be fixed. The factory Default Setting is 115200 BAUD.
PakBus Port
Read Only
The value reflects the internal jumper settings of the camera. It will
either read RS-232 or RS-485. See Section 8 Internal Jumpers if the
jumpers need to be changed.
PakBus Address
1 to 4094
The desired PakBus address for this camera. The factory default is
55.
PakBus
Destination
Address
1 to 4094
The PakBus address of the device the camera will communicate with
or send files to.
PakBus
Communication
Delay
0 to 16
Extra delays may be required for certain communication links such as
satellite.
PakBus Security
Code
0 to 65535
The factory default is 0. If a security code is not required by the
PakBus destination device, set this parameter to 0. Otherwise set the
security code as required by the destination device.
7.8 Still Image Settings
Selecting the Still Image Settings tab will bring up the Still Image Settings
page (See Figure 7-35 Still Images Settings Page). The Still Image Settings
allows the configuration of the still images that the camera will take.
There are 2 sub tabs that include two independent Still Settings:
•
Still Settings #1
•
Still Settings #2
Table 7-12 Still Image Settings describes the variables used in the Still Images
Settings.
