CMP3 Pyranometer
9
4.
Turn the levelling screws as required to bring the bubble of the bubble
level within the ring.
5.
Tighten the mounting screws to secure the assembly in its final position.
Check that the pyranometer is still correctly levelled and adjust as
necessary.
6.
Attach the white plastic sun shield to the pyranometer.
7. Route the sensor cable along the underside of the crossarm to the
tripod/tower, and to the instrument enclosure.
8. Secure the cable to the crossarm and mast using cable ties.
7.3 Wiring to the Data Logger
A schematic diagram of the CMP3 is shown in FIGURE
Bubble
Level
Sun Shield
CM225 Mount
Cable Tie
Crossarm
