CR200 Overview
Each of the four steps has a button with a
?
for accessing Help. Use the Help
in conjunction with the steps outlined below:
Step 1: Create a New File
Step 1 is to open a new or existing file. From the
Home
page, click the
New
button. Use the drop-down list box to select the
CR200
. Enter a 10 second
Scan Interval and click
OK
to complete Step 1.
Step 2: Select the Sensors
Step 2 is to select the sensors to be measured. From the Home page, click the
Sensors
button. The Sensors worksheet is divided into two sections: the
Available sensors tree and the Selected sensors table, as shown below. The
sensors you want to measure are chosen from the Available sensors tree.
Double click on the
Temperature
application group to display the available
sensors. Double click on the
109 Temperature Probe
sensor to add it the
selected sensors table. Click
OK
on the next screen to accept T109_C for the
measurement label, the DegC for the units.
Double click on the
Meteorological
application group. Double click on
Precipitation, and double click on the
TE525 / TE525WS
sensor to add it to
the selected sensors table. Click
OK
to accept Rain_mm for the measurement
label, and mm for the units.
OV-18
Summary of Contents for CR200
Page 2: ......
Page 31: ...This is a blank page...