CSAT3B Three-Dimensional Sonic Anemometer
65
3.
After connecting to the CSAT3B, click on the
Send OS
tab at the top
of the
Device Configuration Utility
main screen. Click on the
Start
button at the bottom of the page, select the .obj file that you
downloaded from the Campbell website, and click
Open
. The OS will
then be sent, followed by a confirmation message that it was loaded
properly.
FIGURE 9-5. The Send OS screen in the
Device Configuration Utility
9.6 Returning the CSAT3B
If there is need to return the CSAT3B either for calibration or repair, please
follow the detailed instructions provided in the
beginning of this manual which gives instructions for generating an RMA
number. If additional help is needed, please contact Campbell Scientific. When
preparing the CSAT3B for shipment, be sure to package it in the same foam
that it was sent in. If the foam cannot be found, new foam should be ordered
from Campbell Scientific before returning the unit.
10. Reference and Attributions
10.1 References
Liu, H., Peters, G. and Foken, T.: 2001, “New Equations for Sonic
Temperature Variance and Buoyancy Heat Flux with an Omnidirectional
Sonic Anemometer”,
Boundary-Layer Meteorol.
,
100
, 459 – 468.
