GPS16X-HVS GPS Receiver
7
(p. 8)
. The CR6 series, CR1000X series, and CR300
series do not require the A300.
Use the DB9-Male-to-Terminal-Block interface to connect the GPS16X-HVS
to the RS-232 port of the CR9000X CPU card. See TABLE
To change the default settings, connect the GPS16X-HVS to a computer.
Either use the A200 interface to connect to a computer USB port or the
DB9-Female-to-Terminal-Block interface to connect to a computer serial port
(p. A-1)
).
TABLE 6-1. Data Logger Wiring
GPS16X-HVS
Data Logger
Function
Red
12V
Power In
Black
G
Power Ground
Yellow
G
or
C
(control terminal)
Ground or
Power Switch
White
C
or
U
configured for Rx
1
TXD
Gray
C
or
U
configured for Tx or PPS
1
RXD or PPS
Blue
G
Ground
Shield
⏚
Shield
1
U
terminals are automatically configured by the measurement instruction.
FIGURE 6-1. CR1000 to GPS16X-HVS connection
