LS300G GSM/GPRS/EDGE/HSPA+ Sierra Wireless Cellular Modem
5
On the
Settings
tab:
•
Set the
RS-232 Baud Rate
appropriate to the datalogger being used:
o
115.2K
for CR800 Series, CR1000, CR3000, and CR6 Series
o
9600
for all others
•
Enter
I2GOLD
(or your custom APN) in the
APN
field.
•
Note that the default
Device Port
number is
3001
. This is used in the
LoggerNet
setup below.
Click
Apply
to save the settings. Reset the modem by briefly pressing the
Reset
button on the front of the modem or by removing power from the
modem.
4.4 Set up
LoggerNet
The
LoggerNet
Network Map is configured from the
LoggerNet Setup
screen.
Setup
has two options, EZ (simplified) and Standard. Click on the
View
menu at the top of the
Setup
screen, and select
Standard
view.
From the
LoggerNet
toolbar, click
Main | Setup
and configure the Network
Map as described below.
1. Select
Add Root | IPPort
.
NOTE
Summary of Contents for LS300G
