LS300G GSM/GPRS/EDGE/HSPA+ Sierra Wireless Cellular Modem
6
2. Add a datalogger to the
IPPort
(PakBus® dataloggers, for example the
CR1000, require a PakBusPort).
3. Select the
IPPort
in the Network Map. Enter the LS300G IP address (or
domain name) and port number. The IP address and port number are input
in the
Internet IP Address
field separated by a colon. Preceding zeros
are not entered in the
Internet IP Address
(for example, 070.218.074.247
is entered as 70.218.74.247).
DevConfig
and the LS300G template file
configure the port number to 3001 for serial server mode. Set the
Extra
Response Time
to
4
seconds.
Example settings for a static IP address:
4. For PakBus® dataloggers, leave the default settings for the
PakBusPort
.
PakBus Port Always Open
should not be checked.
Summary of Contents for LS300G
