NL115 Ethernet and CompactFlash
®
Module
PROGRAM
' CR1000
' FTPClient.cr1
Public Result1, Result2
BeginProg
Scan
(20,Sec,1,1)
Result1
=
FTPClient("192.168.7.85","user","password","CRD:pic.jpg","CRD:pic.jpg",0)
Result2
=
FTPClient("192.168.7.85","user","password","CRD:file.html”,"CRD:file.html",1)
NextScan
EndProg
7.1.4 Telnet
Telnetting to the datalogger’s IP address allows access to the same commands
as the Terminal Emulator in LoggerNet Connect screen’s Datalogger menu.
7.1.5 Ping
Pinging the datalogger’s IP address may be used to verify communications.
7.1.6 Serial Server
With an NL115 attached, the datalogger can be configured to act as a serial
server over the 10 Base T port. (A serial server is a device that allows serial
communications over a TCP/IP port.) This function may be useful when
communicating with a serial sensor over an Ethernet.
7.1.6.1 Serial Input
The
TCPOpen()
instruction must be used first to open up a TCP socket. An
example of this instruction is shown below. The first parameter in
TCPOpen()
is the
IP address
to open a socket to. “” means to listen on this
port rather than connect. The second parameter is the
port number
to be used.
The third parameter is
buffer size
. For a
SerialIn()
instruction that will use this
connection, it gives a buffer size. The
TCPOpen()
instruction returns the
socket number of the open connection or ‘0’ if it cannot open a connection.
socket = TCPOpen(“”,6784,100)
Once a socket has been opened with the
TCPOpen()
instruction, serial data
may be received with a
SerialIn()
Instruction. An example of this instruction
is shown below. The first parameter is the
string variable
into which the
incoming serial data will be stored. The second parameter is the
socket
returned by the
TCPOpen()
instruction. The third parameter is the timeout.
The fourth parameter is the termination character. The last parameter is the
14
Summary of Contents for NL115
Page 2: ......
Page 36: ...Appendix A Formatting CF Card A 4...
Page 40: ...Appendix B PC CF Card Information B 4...
Page 41: ......
