supply kit. Seal the cable-entry conduit by placing putty on the inside and outside of it.
Push the putty down into the cable entries.
CAUTION:
The enclosure needs to be sealed up tight, so don’t be stingy with the putty.
21. Put both bags of desiccant inside of the enclosure.
22. Stick the humidity indicator card on a wall inside of the enclosure.
CAUTION:
Pink on the humidity indicator card means it’s time to change the desiccant. Change
the desiccant at least every year. However, it’s often wise to change the desiccant every
six months.
23. Close the lids on the external enclosure and the T107 enclosure.
Appendix C. PS24 24 Ah power supply with 10 x 12 inch enclosure
94
