6
Important
: To make sure there is no gas leakage, you can fill the canister mouth with
clean water after connecting the canister. If no bubble appears, this means that no gas is
leaking. If a bubble does appear, turn the canister clockwise again until the bubble
appears. If the bubble cannot disappear, remove the canister immediately and contact
your local dealer for service.
Operating Instructions
•
Take out the lid and stove burner from the pot.
•
Make sure the control valve is closed
–
fully turned to the right (clockwise).
•
Connect burner to the fuel canister. Hold the canister and screw the burner
clockwise until burner is securely tightened.
Note: When screwing, it is normal that the gas slightly leaks. Screw it as soon as
possible.
•
Before ignition, please do not turn the control valve to Max as too much gas flow
will take the heat generated from the piezo igniter causing unsuccessful ignition.
•
Turn the control valve to Mid or Low level by turning the knob anti-clockwise, and
then press the push-button igniter to ignite. Keep yourself some distance away
from the burner during ignition. Light stove in a well-ventilated area only.
•
Place the pot on the burner using handles and make sure it is securely locked on
the burner with locking lugs.
•
Add liquid or food into the pot. Do not fill over the safe level line indicated on the
side of the pot.
•
Use handles to support pot when removing the lid or removing the pot from the
burner.
•
Turn the flame control fully clockwise after use.
•
Be careful that the pot and burner will be hot after use. Leave them to cool down
before packaging.
•
Remove the canister from the burner.
•
Store all parts in a cool and dry space.
DO NOT HEAT AN
EMPTY POT
1.
LIGHT THE STOVE
2.
FIX THE POT
