4
Before Assembly
•
Check to make sure the flame adjuster is turned off.
•
Check the camping stove seal O-ring to ensure it is in place and in a good
condition.
•
Keep the gas cartridge upright when fitting it into the appliance. Carefully screw
the gas cartridge into the appliance. Screw the has cartridge using your hand
only. Do not overtighten in order to not damage the valve.
•
Check that the appliance is connected to the gas cartridge properly and no leak
of gas is present.
Operation Instructions
•
Before lighting the appliance burner, place the appliance down on a firm level
surface and ensure that the pan supports are fully open in the cooking position.
•
Turn on the gas by turning the knob by 270 °.
•
Keep pressing the ignition equipment until the burner fires itself up.
•
Set the desired flame level by turning the knob. Proper flame will appear blue
and orange and will smoothly adjust from low to high.
•
After use, turn the knob to “off” position. Wait for the
camping stove to cool
before disassembling.
Disassembling the Appliance
•
Make sure the flame adjusting knob is turned off and the camping stove has
cooled down.
•
Turn the camping stove counter-clockwise until it releases from the canister.
Some gas may escape while unscrewing the canister.
•
Close the pot supports.
