INSTRUCTION MANUAL
CamPilot MR100
51 / 52
▲
Common Specifications
* Design and Specification are subject to change.
SPECFICATION
NTSC
PAL
CPU
Flash Memory
RAM
OS
Compression Type
Resolutions
Bitrate
Frame Rate
Streaming
Bi-Directional Audio
Audio Input Compression
Audio Line Input
Audio Output Compression
Audio Line Output
Sensor Input
Alarm Output
Factory Default Button
RS485
OSD menu key
Ethernet
Protocol
Max. Client
Web Browser
Security
Operation Temp.
In Storage Temp.
Operation Humidity
Case
Weight
Dimensions
Power Requirement
Power Consumption
MODEL
Camera menu setting
GENERAL SPEC
CamPilot MR100
External I/O
H.264 / MJPEG / MPEG-4
D1 ~ QQVGA
32Kbps ~ 8Mbps
1st stream : H.264 or MJPEG @ all resolutions
2nd stream : H.264 or MJPEG @ all resolutions
3rd stream : MPEG-4 @ QCIF resolution
ARM9E 240MHz
Power
Audio
Streaming
1Ch (Line level input)
G.711 / G.726
1Ch. (Line level output.)
Restore to default setting (Network, Password and etc)
1Ch. (Relay Switching - Nominal Voltage 5VDC, 1A)
4.5W
Physical
G.711 / G.726
Software
Ethernet(10/100 Based-T), RJ-45 Connector
IE 5.5 or above
MD5 Password / iptables (firewall)
TCP/IP, HTTP, HTTPS, DHCP, PPPoE, FTP, DNS,
DDNS, NTP, ICMP, SMTPE, UPnP, RTP/RTSP,
ONVIF, and etc.
144(W) x 61(D) x 54(H) mm
DC 12V / AC24V / POE
Aluminum
YES
-10°C ~ +55°C
-20°C ~ +75°C
Under 90
％
(Non-condensing)
317g
Network
20
Video
Streaming
30/25 (NTSC/PAL) fps in all resolutions
Two way, full duplex
1Ch. (Dry Contact N.O. / N.C.)
8MB
64MB
Embedded Linux
System
