07
ENGLISH
2. Installation
4. Immediately remove any leaked adhesive with a spatula or similar and clean the
contaminated surfaces with the cleaner and a nonwoven cloth.
5. After complete installation and
desiccation
of the adhesive, a sealing joint can be
pulled around the antenna base.
Important:
The antenna must point with the motor unit in the direction of travel!
Important:
Do not glue the connection socket
of the F-plug with the roof. In case of
service, the antenna can no longer be
removed from the roof!
direction of travel
6. Then place the antenna on the moun-
ting plate and fasten it again with the
four Allen screws.
Summary of Contents for Satmex Flat 2
Page 1: ...Satmex Flat 2 Bedienungsanleitung...
Page 21: ...21 DEUTSCH Notizen...
Page 23: ...Satmex Flat 2 user manual...
Page 43: ...21 ENGLISH Notes...