10
GB
TROUBLE SHOOTING
Cartridge would not install
No gas supply in (
) position
Smell gas in “
l
” position
Low flame
Uneven flame
No ignition/Faulty ignition
Extinction in operation
Trouble shooting
Ignition knob is not turn to “
l
” position
P
Turn ignition knob completely to
“
l
” and reset cartridge.
Safety device activated
P
P
P
Refer to explanation for safety
device / STOPGAZ™ flame guard.
Ignition knob malfunction
P
P
P
P
Contact local agent to repair.
Clogged nozzle
P
P
P
Contact local agent to repair.
Cartridge incorrectly installed
P
P
P
P
Fit cartridge guide into cartridge
slot.
Clogged burner holes
P
P
P
Use a metal brush to clean it.
Troubles
Causes
G - TROUBLESHOOTING
DON’T :
y
Never leave wet sponges, cloths, or cleaning pads on the Stainless steel surface.
y
Never leave solutions of chlorine bleach and water on your Stainless steel surface. Chlorides, which are found in most soaps,
detergents, bleaches, and cleansers, are very aggressive to stainless steel.
y
Never use oven cleaners that contain caustic chemicals.
y
Do not use paper towel or scratch-sponges.
2 - Storage and transportation
- Check that the lever (2) is in the UNLOCK position (Fig. 10).
- Always remove the gas cartridge from the stove during storage or transportation.
- Store the stove and the cartridge in a cool, dry and well-ventilated area, out of reach of children. Never store in a basement or
cellar.
