MANUAL USER WI-FI THERMOSTAT ATB100
Page 10
Campini thermostat does not communicate
correctly
If the icon
appears on the Campini Thermostat, this means that communication with
the Campini Router is not available
This icon, if rarely observed, does not constitute a functional problem for the device. The
most likely cause is the energy saving system which tends to dampen the power of the
radio signal. In complete autonomy the Campini Thermostat will increase the radio signal
strength to re-establish the radio transmission.
If the icon
is displayed often, the causes can be multiple:
1) The Campini Thermostat or the Campini Router have recently been moved. In this
case the radio communication can be interrupted for a few minutes due to the
energy saving system. If the problem is temporary it is not necessary to intervene.
2) The Campini Thermostat is too far from the Campini Router, or there is an obstacle,
such as thick walls or shielding materials, between them. In this case it is necessary
to bring the Campini Router closer to the Campini Thermostat.
3) The Campini Thermostat has been eliminated using the
Campini Corel Thermostat
application.
4) The Campini Router is turned off.
If the icon
or icon
does not appear on the Campini Thermostat, this means
that the association with the Campini Router has not been performed (see the
Configuration
chapter).
