MANUAL USER WI-FI THERMOSTAT ATB100
Page 3
Compatibility
The Campini Thermostat has a relay in voltage-free deviation and can be used with low
and high voltages, which makes the device compatible with the majority of heating and
cooling. The wiring diagram, placed on the plate of the thermostat, indicates how to connect
the control cables. The following list contains the types of supported systems:
•
Gas burner
•
Fan coil unit
•
Zone valve
•
Electric heater
•
Radiant or floor plant
•
Cooling system
Supported installations
In a single zone installation, the Campini Thermostat directly controls the system via the
control cables. It communicates via radio with the Campini Router which is connected via
a WI-FI network to the internet thus allowing remote control thanks to the
Campini Corel
Thermostat
application.
If your house has a multi-zone system, you can install more Campini Thermostats, up to a
maximum of 8, and associate them with the same Campini Router.
With this configuration, with the Campini Thermostats connected to the zone valves, it is
possible to remotely control the individual zones.
