background image

The 

SAFETY PRECAUTIONS  

 

 

1. To prevent 

fi

re or shock hazard, do not expose this equipment to 

high humidity and/or dust. Do not use in an unprotected outdoor 
installa on nor any area classi

fi

ed as overly damp. 

2.  The temperature for installa on should be kept between 32°F to 

140°F (0°C to 60°C). Avoid direct sunlight exposure or extreme 
changes of temperature over a short period of  me. 

3.  Do not disassemble the unit or place it on an unstable base. 

4.  Do not drop the unit and avoid heavy impact. 

5.  This unit should not be permanently installed unless proper ven

la on is provided. Any enclosure openings must not be blocked or 
covered as they protect the unit from overhea ng. 

6.  Before cleaning, turn o

 the power and unplug the unit from all 

connec ons. Use a damp cloth. Do not use liquid or  
aerosol cleaners. 

7.  Do not overload outlets and extension cords as this may  

result in a risk of 

fi

re or electric shock. 

8.  Enclosure entry is dangerous. Never push objects of any kind, in

cluding liquids, into this unit through openings as they may touch 
dangerous voltage points or short

out parts that could result in a 

fi

re or electric shock. 

9.  Do not a empt to open or service this unit yourself as  

opening or removing covers may expose you to dangerous voltage 
and other hazards. 

10. There are no user

serviceable parts inside the unit. If the unit re

quires service contact your authorized dealer, or an  
authorized repair service company. 

Camplex

 

812

 

Kings

 

Highway

 

Sauger es,

 

NY

 

12477

 

www.camplex.com

 

Summary of Contents for CMX-FG700









Reviews: