The nozzle of the switch valve must be connected to the burner and must not be exposed to air.
WARNING
WARNING: If "growing" bubbles appear, do not use or move the gas cylinder. Contact an gas supplier or
your fire department!
If a leak is detected, close the pressure regulator lever (b) immediately and tighten the loose connection
or replace the leaking part.
Repeat the leak test.
WARNING
DANGER: Never search for gas leaks using an open flame. Before checking for leaks, make sure that no
sparks or open flames can form in the vicinity. Sparks or flames can cause an explosion which can lead
to serious or even fatal injuries or material damage.
If a leak is detected, close the pressure regulator lever (b) immediately and tighten the loose connection
or replace the leaking part.
Repeat the leak test.
DANGER
Proper installation of burner and switch valve's nozzle:
The nozzle of the switch valve must be inside the burner.
Wrong installation:
The nozzle of the switch valve does not be connected to the burner.
10
www.camplux.com
Visit Us: Camplux.com
support@camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475