6. Place the griddle plate on the griddle body.
5
3
Instruction of Operation
To light griddle
Must read all steps carefully
1. Push the control knob in and turn counter-clockwise to the “Light” position.
2. If fire does not appear in 5 seconds, shut the burner control off, wait for 5 minutes, and repeat the lighting
procedure.
Use match for lighting
1. Don’t lean over the griddle while lighting. Ensure no gas leaks occur.
2. Control knob must be in the “OFF” position. Get the griddle top off.
3. Light a long match, then put the match on the right or left side of the burner.
4. Press the control knob in and turn counterclockwise to the “HIGH” position.
Be sure the burner lights and keep it lit.
Check burner fire
Remove the griddle plate or the grease cup before lighting as to visually check the fire. Light burner and turn knob
from high to low you will see a smaller fire in the low position and bigger in the high position.
Check the fire before each use. If you only see low flame, refer to Burner has low flame regardless of knob position
in the TROUBLESHOOTING GUIDE.
Model: GG301S
Grease Cup
9
Visit Us: Camplux.com
support@camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475
www.camplux.com
Summary of Contents for GG301S
Page 15: ......