background image

support@camplux.com

Visit Us: Camplux.com

3330-A Marathon Ct Charleston, SC 29418

www.camplux.com

1

7

After-sale Service

When

 you find something wrong with the appliance, contact Camplux for further 

assistance.

Features

  

Ignition knob is a ‘‘push and turn’’ design so children can not easily turn the 

    

knob.

●  Ignition produces powerful sparks which easily ignites the burner at all times.

●  Jet type gas pipe can not be blocked by dirt.

●  Control knob has many stages of micro-control, suitable for all kinds of 

    

cooking.

●  Specially designed burner and burner cap with high energy efficiency can lower 

    

gas consumption.

Check up and Care of the Unit

  Be sure that the burner cap and the burner itself are in their correct positions.

●  If the flames become uneven, remove the burner cap and wash it with water. 

    When the flame pores become clogged with dirt. Clean them with a brush or a 

    similar instrument.

●  After washing the burner cap and the burner itself dry them thoroughly and 

    then replace them in their correct positions. Light the burner and ascertain 

    whether the burning is normal.

●  To fit the burner connect its nozzle hole with the nozzle and insert the 

    projection at the back of the burner into the hole on the burner base.

●  If the electrodes of the igniter are soiled, the burner cannot be igniter easily. 

    Inspect the electrodes carefully when you remove the boil-over receptacle and 

    if they are soiled, clean them with a dry cloth.

Summary of Contents for TC02SS













Reviews: