In order to avoid destroy, fire and
other accidents, please do not put
anything combustible, explosive,
volatile and strongly corrosive into
the refrigerator. In order to avoid
freezing, rupture and other losses,
please do not put the bottles with
fluids or sealing containers into the
refrigerating box.
In order to avoid fire,
please do not use
combustible solvents
nearby the refrigerator.
8. High temperature warning of the refrigerating chamber
When the temperature of the refrigerating chamber has been above
－
8
℃
for six hours,
high temperature warning will ring. The buzzer will ring per second for ten times and then
ten times every thirty minutes, and temperature display region will show failure code (E9);
the ringing will stop when the temperature of the refrigerating chamber is below
－
12
℃
.
Press any key to cancel the warning buzzer (if it does not buzz after thirty minutes). But
the failure code display state is not canceled, until the failure is solved.
9. Failure hint
Note: when there is a failure, the system will display all machine failures' codes by turn.
The warning will be automatically canceled or be canceled by pressing any key. When
failure happens, it is a priority to show failure code till failure recovery, otherwise the set
temperature and quick-frozen icon cannot be displayed. If a failure has been displayed all
the time and automatic recovery fails, please contact After-sale Department or
professional maintenance personnel.
10. Force defrosting
Press and hold "temperature regulation" keys
∧
and
∨
for three seconds to enter into
Force Defrosting Mode. High position of LED temperature region always shows "3" with
no display in the low position. When entering into Force Defrosting Mode, the compressor
and fan will be stopped immediately. When defrosting heater is forced to be started and
under Force Defrosting Mode or the exiting conditions are satisfied, press and hold
"temperature regulation" keys
∧
and
∨
for three seconds to exit from the Force
Defrosting Mode.
Matters needing attention
7
P
e
s
tic
id
e
C
o
s
m
e
tic
s
A
m
y
l
a
c
c
e
ta
te
Binder
A
lc
o
h
o
l
Function introduction
6
Hint
Hint
E2
E6
E5
E9
E7
EC
Failure code
Failure code
Temperature sensor failure
of refrigerating box
Communication failure
Refrigerating defrosting
sensor failure
High temperature warning
of the refrigerating chamber
Ambient temperature
sensor failure
EEPROM circuit failure
Do not arbitrarily dismantle
or repair. Choose the repair
shops designated by the
manufacturer to replace the
accessories.
Use standard professional three-
hole power socket (above 10A).
Socket grounding must be good.
In order to avoid accidental
harm caused by closing a child
inside or refrigerator falling, do
not allow the children to enter
into or climb the refrigerator.
Do not put the heavy
things on the refrigerator,
otherwise it will easily fall
and cause harm.
Do not put too much food into
the refrigerator.
Do not open the door and
drawers for a long time or
frequently open the door
and drawers, otherwise it
w o u l d w e a k e n t h e
efficiency of the complete
m a c h i n e a n d i n c r e a s e
operating load.
When the refrigerator is not at
n o r m a l o p e r a t i o n o r i s
destroyed, please cut off the
power and inform local service
center.
Do not splash the water on the top or
back of the refrigerator, otherwise it
would reduce insulation effect.
Attention:
The product is a household refrigerator. According to the national standards, household
refrigerator is only applicable to store food and cannot be used for other purpose such as
storing blood, drugs, biological products, etc.
