After unpacking, disassemble unit before using first time. Refer to “HOW TO DISASSEMBLE” for directions.
Wash all parts except motor base in warm, soapy water. Rinse and dry immediately. DO NOT IMMERSE
MOTOR BASE IN WATER.
ASSEMBLY
Chopper Assembly
1.
Position Driver on motor base.
2.
Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.
3.
Place blade adaptor onto the Driver.
4.
Place chopper onto the blade adaptor.
5.
Turn the chopper to the right position.
6.
Place cover on bowl, turn clockwise until cover interlocks on bowl.
7.
Place pusher into feeding chute
Processed Food
Measurement
Per per batch
Chocolate
≤
100g
Cheese
≤
200g
meat
≤
500g
Tea or Spice
50~100g
Fruit & Vegetable
100~300g
Onion
≤
500g
Notes (Chopper) :
-
Always keep the chopper inside the bowl before feeding food.
-
Use pulse function for several times to avoid cutting too fine. Do not run for too long while cutting hard
cheese or chocolate. Otherwise these materials will overheat and begin to melt.
-
Standard chopping period: 30-60 sec.
Kneading blade Assembly
1.
Position Driver on motor base.
2.
Position processing bowl into the Driver and turn clockwise to seat firmly on motor base.
3.
Place blade adaptor onto the Driver.
4.
Place kneading blade onto the blade adaptor.
5.
Turn the kneading blade to the right position.
6.
Place cover on bowl, turn clockwise until cover interlocks on bowl.
7.
Place pusher into feeding chute
Processed Food
Measurement
per batch
Flour / Soft Cheese
≤
300g
Egg
≤
5pieces
Notes (Kneading Disc):
