CamRanger PT Hub & MP-‐360 Quick Start Guide
•
To use the CamRanger PT Hub and Motorized tripod, a CamRanger is required.
•
Make sure the CamRanger is registered, the firmware is updated to version 6 (and up), and the
CamRanger app (on the iPhone, iPad, Android device, Mac, or Windows computer) is updated to
the most recent version. To update firmware go to: www.CamRanger.com/downloads.
•
The CamRanger must be registered (see CamRanger user manual), the CamRanger PT Hub does
not require registration.
•
Required parts:
o
CamRanger*
o
CamRanger PT Hub
o
Motorized tripod (either the MP-‐360, MP101, Bescor, or Hague)*
o
USB cable (included with CamRanger or camera)
o
Serial connector (included with the CamRanger PT Hub)
o
USB 2.0 A to B connector (included with CamRanger PT Hub)
o
Camera*
o
Device* (iPhone, iPad, Android device, Mac, or Windows computer)
* Requires charged battery or connection to AC power
CamRanger
•
Refer to the CamRanger Quickstart Guide and User Manual for CamRanger registration
and user instructions.
•
Note that the Camera -‐ CamRanger hardware connection is different when using the CamRanger PT Hub
and motorized tripod head. Refer to the “Hardware Setup” of this manual for connection instructions.
Requirements for Setup
Hardware Parts
