4
Getting started
5
Optional installation of VoiceConnect
(Windows XP/2000 only)
5a
Insert the VoiceConnect CD into your CD-ROM drive,
this should start the installation automatically. If the
the installation does not start automatically:
• Browse to My Computer
• Right click on the CD-ROM containing the VoiceConnect CD
• Select Open from the menu
• Double-click on the file setup.bat in the window that has just opened.
5b
Once the installation is complete the VoiceConnect application
will start for the first time*. You may see a Windows Security Alert
from Windows Firewall, similar to that in Fig 1. Click Unblock to
allow VoiceConnect to access your network.
5c
Once the application has started you should see the
VoiceConnect Interact icon in your task bar, as shown in Fig 2.
* If for some reason the application does not start automatically once the
installation is complete you can start the applciation manually by clicking
on Start > All programs > VoiceConnect > VoiceConnect.
Fig 1
Fig 2
a
Show main menu
Show address book
Show IP address
4a
When the Flexor 500 starts up it carries out a series
of checks for networking and finally that there is a
SIP (VoIP) account configured. You can press the
Menu
or
Addr
soft keys to access those menus or press the
IP
button for additional diagnotic information (see
4c
below).
b
Show main menu
Show address book
4b
The Flexor 500 is likely supplied by your vendor
pre-configured for a VoIP service. Once the Flexor 500
has completed the startup checks you will see a screen
similar to that shown above. The call lights will also
light up solid green to show that it is ready to make
and recieve calls.
c
Show main menu
Back to startup screen
Show network config menu
Show address book
Access the web pages of
the Flexor 500 by entering
the URL from the Flexor
500 screen direclty into
your favourite web browser
and press Enter.
4c
If the Flexor 500 does not have a SIP
(VoIP) account configured or you have
pressed the soft
IP
button shown in 4a
then you will see the screen shown
opposite.
In order to configure the Flexor 500,
or to further diagnose any problems
you are having, access the Flexor 500
web pages using the URL shown.
VoiceConnect Interact icon
