batteries inside.
Description of the device.
1. Control panel: Buttons: 1.a "MODE" 1.b "UP" 1.c "DOWN" 1.d "MAX / MIN" 1.e "Celsius / Fahrenheit"
1.f "LIGHT / SNOOZE"
2. CLOCK 3. INTERNAL TEMPERATURE (AT PLACE SETTING POSITION) 4. DATE 5. EXTERNAL TEMPERATURE OUTDOOR (AT PROBE SET
POSITION) 6. EXTERNAL PROBE
7. COMFORT LEVEL 8. PROGNOSIS
Default mode:
To display the currently set alarm time, press "MODE".
To set the date and time:
1. Press and hold "MODE".
2. The year will be displayed. By using the 1.b "Up" and 1.c "Down" buttons and set the desired year.
3. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired month.
4. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired day.
5. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired 12 hour or 24 hour display format.
6. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired time.
7. Press the 1.a "MODE" button. After the 1.b "Up" and 1.c "Down" buttons and set the desired minute.
8. Press the 1.a "MODE" button. To finish setting the time.
„MAX / MIN” button
After pressing, the maximum temperature registered will be displayed and after the next press the minimum temperature insideand outside will be displayed.
„C / F” button
After pressing, switch between temperature display between Celsius and Fahrenheit
„Light / Snooze”
Turn on the backlight for 5 seconds.
Alarm setting:
1.Press and release the 1.a "MODE" button.
2. Press and hold the 1.a "MODE" button. as the last alarm clock setting is displayed until it blinks.
3. Via the 1.b "Up" and 1.c "Down" buttons and set the desired time. Then confirm by pressing the 1.a "MODE" button ..
4. Through the buttons 1.b "Up" and 1.c "Down" and set the desired minute. Then confirm by pressing the 1.a "MODE" button ..
5. Through the 1.b "Up" and 1.c "Down" buttons and set the desired alarm clock alarm volume. Then confirm by pressing the 1.a "MODE" button ..
After starting the alarm you can press the "LIGHT / SNOOZE" button to delay the alarm by 10 minutes.
Pressing any other button will end the alarm.
To turn on the alarm:
Press and release the 1.a "MODE" button. The time of the set alarm will show then press and release the 1.b "UP" button.
Probe:
On the back of the probe there is a flap that needs to be removed in order to insert the battery.
Please insert the battery into the chamber.
Next to the battery compartment there is a small switch with numbers 1,2,3 corresponding to each position in which it may be located.
The numbers 1,2,3 correspond to the appropriate transmission band between the probe and the weather station.
The "UP" button in the default mode on the weather station allows you to switch between bands.
In order for the probe and weather station to co-operate, they must be set to the same band.
If the probe is set to "2" then we must also set it to "CH2" at the weather station.
Technical data:
Device SUPly: 100-240V 50/60 Hz + 3xAAA (LR03, R03)
Probe power sUPly: 2x AAA (LR03, R03)
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1. Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2. Das Gerät ausschließlich an die Steckdose 230 V - 50 Hz anschließen. Es darf nicht zu
anderen, bestimmungswidrigen Zwecken benutzt werden.
3. Wegen Vorsichtsmaßnahmen, sollten keine weiteren Geräte an den gleichen Stromkreis
angeschlossen werden.
4. Falls sich Kinder in der Nähe befinden, sollte bei der Nutzung des Gerätes spezielle
(DE)
DEUTSCH
4
