ENGLISH
DETAILED SAFETY CONDITIONS
1. Do not use metal objects to remove ice from the walls of the device. This may result in accidental puncture
of one of the refrigerator's circuit elements and cause irreparable damage.
2. Do not store containers (glass bottles or cans) with liquids, particularly carbonated drinks, in the freezer.
The container may explode during freezing.
3. Do not touch the cooling surfaces, particularly when you have wet hands. This may cause burns or other
injuries.
4. Ice that has been removed from the freezer is not suitable for consumption.
5. Place the refrigerator in a well-ventilated area away from any heat sources. The refrigerator should be
placed a minimum of 50cm away from a radiator. The same applies to ovens and gas or coal cookers.
The distance between the refrigerator and electric cookers should be a minimum of 50cm.
6. Do not place too many items on top. Do not place any heavy items on top.
7. If there is another refrigerator or freezer nearby, the distance between them should not be less than 2cm,
so as not to cause condensation of water vapour.
8. During transport do not tilt the refrigerator at an angle greater than 45 degrees relative to the base.
9. Do not store aerosols or other flammable substances in the refrigerator.
10. Do not use any electrical devices inside the refrigerator!
DESCRIPTION OF THE DEVICE
A.
Shelf
B.
Condensed water container
C.
Freezing compartment
D.
Thermostat knob
E.
Small shelf
F.
Bottle shelves
G.
Cooling compartment
USING THE DEVICE
1. Connect the device to a power supply.
2. After connecting the device wait three hours to make sure it is working properly.
3. You can regulate the cooling intensity with the thermostat knob (D).
FOOD STORAGE TIPS
1. It is recommended that you leave some room between products in the refrigerator in order to ensure free
flow of air.
2. Food should be stored in separate containers so it doesn't dry out or emit odors.
3. Hot food should be cooled prior to placing it in the refrigerator. Otherwise, the overall temperature in the
refrigerator and electricity consumption will increase.
4. Less frequent opening of the refrigerator reduces electricity consumption.
CLEANING AND MAINTENANCE
1. Before cleaning the device make sure that it has been disconnected from the power supply.
2. Do not clean the device with running water.
3. The device should be cleaned using an aqueous baking soda solution (the water should be lukewarm).
4. Clean the internal accessories separately using soap and water. Do not wash them in the dishwasher.
5. In case of the interior being frosted over, remove the frost prior to cleaning. To do this remove all products
from the refrigerator, take out the shelves and drawers, disconnect the power cord, open the door and wait
for the frost to melt. Next, wipe the water using a cloth.
6. Do not use abrasives, detergents or soaps. After cleaning, rinse with clean water and dry thoroughly. After
cleaning, dry your hands and connect the device to a power supply.
TECHNICAL DATA
Power source 220-240V ~50Hz
Electric current 0.45A
Energy efficiency class: A+
Climate class: N/ST
Sound rating: below 42dB
12
Summary of Contents for CR 8071
Page 2: ...2 A B C D E F G ...